DC Power systems rectifiers MRC AUPUS C

MRC rectifier modules are designed and optimised for demanding industrial and telecom applications. Rectifier delivers 1600W output power at 48, 60, 110, 125 and 220 VDC and 1100W at 24 VDC.

More details

Features

  • Convection cooling
  • Outputs 24, 48, 60, 110, 125, 220 VDC
  • 1600W output power
  • 1100W for 24VDC model
  • Constant output power characteristics
  • Nominal input voltage 230VAC
  • Input voltage range 140-290 VAC
  • Active load current sharing
  • Internal overtemperature protection
  • Digital communication over CAN bus with VIDI controller
  • Flexible design with full front cabling
  • EMC: EN 300 386
  • Safety: IEC/EN 60950-1 CB certified

Product description

MRC rectifier modules are designed and optimised for demanding industrial and telecom applications. Rectifier delivers 1600W output power at 48, 60, 110, 125 and 220 VDC and 1100W at 24 VDC. Rectifier input is single phase, it input range is between 140-290Vac. Rectifiers are convection cooled. Rectifiers can be operated either with a system controller or as stand-alone modules with or without batteries in the output.

AC inputMRC24-1100MRC48-1600MRC60-1600MRC110-1600MRC125-1600MRC220-1600
Nominal input voltage230 VAC
Input voltage range140-290 VAC ( 100% output power 180-275 VAC)

Startup voltage180 VAC
Reduced output power140-180 VAC, derating factor 1% / 1 VAC
Input frequency range45 to 65 Hz

Maximum current (at 180VAC, full load)6.9 A9.7 A9.8 A9.6 A9.6 A9.6 A
Power factor
0.99 (typical @ 230 VAC)
Input protection


Mains fuse, varistor and gas discharge tube for transient surge protection, automatic shut-off above 290 VAC (restart at 280 VAC)

DC output
Voltage range21-30 VDC42-58 VDC51-72 VDC97-132 VDC97-145 VDC189-265 VDC
Voltage factory setting27.3 VDC54.5 VDC68.1 VDC123.6 VDC136.8 VDC245.3 VDC
Maximum current45.8 A @ 24V32.7 A @ 48V26.7 A @ 60V15.5 A @ 110V12.8 A @ 125V7.2 A @ 220V
Constant output power1100W1600W
Hold-up time> 20 ms, at full load, output voltage from nominal to minimum
Static voltage regulation+/- 3.0 % (load,line, temperature)
Dynamic load regulation+/- 4.0 % for 10%-90% or 90%-10% load step, recovery time < 1.0 ms
Ripple and noise< 100 mVp-p
Output protectionOvervoltage shutdown, current limit / short circuit protection, power limiting, internal overtemperature protection
Features
Efficiency, typical (at 50-85% load)90%92%91%> 92%> 91%> 91%
Load current share+/- 5% from true average current between the modules
Rectifier alarmsMains fault alarm (high/low), low output voltage alarm, vervoltage shutdown alarm, rectifier alarm, température alarm
Visual indicationsLED: green/red/yellow
Energy save operation modeSee VIDI controller manual
Mechanical
Dimensions230 x 83 x 350 mm
Weight4,60kg
Protection classIP20 / IEC 529
Connections
Connector, ACAppliance plug IEC 320 / 10 A male
Connector, DCFCI Twinblade TM Power IO connector
Connector, PowerCAN2 pcs RJ-45
Environmental
CoolingNatural convection
Accoustic noise< 40 dB
Operating temperature-20 / +50 °C
Storage temperature-40 / +70 °C 
Humidity95% relative humidity, non-condensing
Altitude (max)2000 m above sea level
Applicable standars
EMCETSI EN 300 386: 2005
Environment

Operation: ETS 300 019-2-3 cl T3.2

Storage: ETS 300 019-2-1 cl T1.2

Transportation: ETS 300 019-2-2 cl T2.3

SafetyIEC / EN 60950-1
ApprovalsCE, CB certifié
ROHS/DEEE2002/95/EC
QualityManufacture and design conform to ISO 9001, ISO 14001