Home

Specially designed for DIN rails

The AFRDin range is a family of stabilized and regulated single voltage DC power supplies, especially designed for mounting on DIN rail. According to the model the input network can be 115 VAC, single phase 230 VAC, 230 VAC or 400 VAC three phase. The power factor correction (PFC) according EN61000- 3-2 Class A is also integrated. Compact and powerful, this series has the UL, C-UL and CE marking. This series is ideally suited for all electrical applications like electronic enclosures and the automation industry in general.

Decentralized modular technology

Aunilec Modular UPS with multiplied components also called decentralized technology is the only possibility to work without the risk of a “single point of failure”. Each UPS module has all, - rectifier, inverter, static bypass switch, back-feed protection, battery fuse and control logic LCD display - to garranty autonomous operation.

Optimize your investments

Power consumption and power requirements are constantly changing.  With our Aunilec Modular you can simply increase or decrease the UPS power according to your needs. This is fast and cost effective when you increase the UPS by small steps. During a period of less requirements/power consumption, you simply remove UPS modules to save energy costs.

Reduce installation and maintenance costs

The modular UPS reduces space requirements. The maintenance and service parts costs are easy to calculate and extremely transparent: only one module !

Absolute reliability and performance

To ensure its compatibility with the most demanding applications, the Aunilec DPS system can withstand a high short-circuit current, in order to guarantee the selectivity of the downstream protections. The fully DIGITAL microprocessor logic controls the power conversion, supervises operation, supports the system and modifies the parameters in case of component failure to assure power supply to the load. 

If the load is highly distorted, the high frequency switching and the DPS loops support the system by keeping THD low. The Aunilec digital UPS units are fitted with a modern IGBT technology and a PWM modulation allowing to obtain a pure sinusoid output wave as required by the strictest standards contained in IEC EN 62040 class VFI-SS-III. 

Ventilation may be redundant, allowing to keep a rated output load only using one half of the fans. The air flow sensors detect the ventilation drop and immediately trigger an alarm, allowing to replace the damaged fan. 

Galvanic isolation transformer

This high-quality online UPS from Aunilec is provided with a galvanic isolation transformer, which means that the electric circuits before and after the UPS are not connected physically, but via an electromagnetic field. This increases the reliability of the protection essentially. Spikes and disturbances cannot pass the magnetic field of the galvanic isolation transformer.

13 different powers available !

The MPTR is available in power from 10 to 300 kVa

The HELIOS_MPW is the ultimate modular UPS for DATA CENTRES and other CRITICAL LOADs. The HELIOS_MPW is designed to protect any critical high-density computer and IT environment, whilst achieving maximum availability. The HELIOS_MPW grows along with the demands of the business without over-sizing the UPS - optimizing both the initial investment and the Total Cost of Ownership. As soon as demand increases, the HELIOS_MPW modular solution can expand its power capability, maintaining the highest levels of power protection, availability, redundancy and investment savings. 

The MultiPlus DSP0.9 Hybrid is simultaneously powered by solar energy, grid and battery. It is the first UPS with “cash back guarentee”. 

The energy supply

Hybrid function with scalable Off Grid MPPT controller, UPS, On-line “double conversion” technology (VFI), Controllable input current management, Split / double bypass input, Output power factor 0,9, Up to 8 units in parallel, High efficiency > 94%, Backfeed protection

The brain

Controllable energy-mix of different energy sources, Future-proof thanks to Open Source conception, Apps, add-ons, plug-ins, updates and upgrades …, Up to 18 programmable IN/OUT interfaces, Remote diagnosis and remote monitoring, Cost reduction by peak load elimination, Free choice of energy supplier, 100% green electricity

New product !

The rack modular, scalable, hot-swappable, online double conversion UPS ranging from 10 to 40kVA/KW, with its flexible configuration of 3/3, 3/1 and 1/1, compact structure, is the ideal choice for small and medium data center. 7” color touch screen LCD with integrated bypass.

Power modules

1 to 4 power modules can be connected according to the sub rack dimensions.

For industry and datacenter applications

The Helios 20S UPS series is the ideal solution for industry, datacenter, IT server and home applications. 

Long backup time

Available with external batteries for long backup time.

Power module

20kVA/18kW power module (up to 4 cabinets in parallel)

Designed for 19" rack cabinet

The Helios STR is a UPS module for 19" racks and cabinets.

Independant module

Each power module is an independant UPS with rectifier, inverter and bypass.

HE - High Efficiency

VEGA HE series is available from 100 to 800 kVA. The UPS features a new on-line double-conversion technology utilising IGBT and DSP (Digital Signal Processor) control to provide maximum protection, power quality and green energy for any type of application including datacentres, disaster recover sites, telecoms rooms, industrial processes and security applications.

High efficiency stands for higher active power available if compared with legacy UPS thanks to output unitary power factor (up to +25% if compared unity with same UPS at p.f. 0,8). 

Nominal power is granted with no downgrading independently from operating temperature in the range 10÷40°C. Furthermore, control circuits and specifically designed firmware grant outstanding online double conversion efficiency up to 95,5%, comparable with the best transformeless UPS available on the market.

OP series - on-line double conversion

The OP series consists of UPS 5000 VA to 10000 VA. The technology, On-Line Double Conversion, is able to guarantee a constant supply of private and any electrical interference, both in the presence or absence of voltage with the help of the battery. The management software allows monitoring, programming and supervision of the proper operation of powered devices. UPS OP series are particularly suitable for powering computer system networks (industrial automation, telecommunications ...). The study of the battery also drew our attention because it is one of the most fundamental parts of the UPS. Indeed, we have developed an innovative charging system ABM (Advanced Battery Management) which increases the lifetime of the battery and optimizing recharge time (3-level charging technology).

Cabinet for power sources

The panic lighting can be switched on or off while the presence of the public. If the light sources are off on standby, their automatic ignition must be provided from a sufficient number of power failure detection points. The establishment of a cabinet "BC-PANIC" allows the laying up of the anti-panic lighting (for power sources only).

Associated with a permanent central source, it allows switching, ambient lighting in PERMANENT to NO PERMANENT mode. Recovery in PERMANENT mode can be done at any time manually or automatically on disappearance sector.

Hybrid inverter

During the day, the primary function of the PV installation is to supply the load with Energy. Every excess will be stored in the batteries or/and re-injected into the Grid. These functions are configurable.

Energy storage

During weak PV production or at night, the energy stored in the batteries supplies the load or can be re-injected into the Grid. The different discharge parameters are configurable

Blackout protection / Offgrid

The integrated Line-interactive UPS guarentee 100% energy supply in case of a power failure. The output power is 3kW for AUNISOL3+G (single phase), 5kW for AUNISOL5+G (single phase) and 10kW for AUNISOL10T+G (three-phase). The AUNISOL series can also work as an Off Grid installation.

Intelligent user interface

VIDI Controller Platform is for AUPUS DC Power Systems. It provides intelligent and easy user interface and comprehensive set of features for DC Power System management.

VIDI architecture is based on PowerCAN bus communication and a modular design, which enables excellent system expandability, selectable additional features and flexibility in the design.

Working principle

During normal day operation, the connected load is powered by solar energy. If the solar energy is not strong enough, all missing energy is supplied by the batteries. If both energies are not available, the system automatically switches to normal AC supply or genset.

What makes the difference ?

Our VRLA Gel deep cycle batteries are conform to the cycles use test norm IEC61427. The batteries still provide 100% of the full capacity in Ampere-hour (Ah) after 148 cycles.