Home

MULTI PLUS is designed and built using state-of-the-art technology and components. It applies the advanced technologies such as a DSP (Digital Signal Processor), dual core microprocessors, three-level inverter circuits and resonant controls to provide maximum protection to critical loads with no impact on downstream systems, all whilst maintaining optimised energy savings. With a unique control system, it makes it possible to reduce the inverter output harmonic voltage distortion (<1% at resistive linear load and <1.5% at non-linear load) and provide a rapid response to all load variations, ensuring an outstanding sinewave form during all conditions.

LED display

The comprehensive LED display provides easy read-out status of the UPS : working on AC or battery mode, battery level in case of blackout, fault indicator and load level

EOS Series

The Series EOS, featured with smart microprocessor control design, AVR boost and buck, smart USB interface and cold start function, is a cost-effective solution to your mission-critical PC and valuable peripherals. The AVR Boost and Buck automatically corrects either undervoltage or overvoltage condition without unnecessary battery drain and extends the life of the battery.

Smart USB

It offers real-time power and UPS status monitoring with automatic or scheduled shutdown and many other advanced power management functions.

These new devices are the result of a research and development action undertaken by our company, aimed at achieving maximum reliability and better performance in the field of energy supply systems. It was not chosen to implement only traditional energy conversion systems (isolation transformer with a bridge thyristor), but to combine the flexibility and advance of a digital microcontroller logic. AC/DC conversion unit with thyristor technology and a controlled full bridge configuration. Use in filtered regulated power supply and battery charger with variable voltage from 24Vdc to 31Vdc with adjustment by potentiometer on the front of the unit. Electronic controls make RCRFn rectifiers reliable and increase battery life.

LCD Display

The comprehensive graphic display provides easy read-out status of the UPS from the screen, such as input, voltage, load level, battery level...

EOS|D Series

The Series EOS|D, featured with smart microprocessor control design, AVR boost and buck, smart USB interface and cold start function, is a cost-effective solution to your mission-critical PC and valuable peripherals. The AVR Boost and Buck automatically corrects either undervoltage or overvoltage condition without unnecessary battery drain and extends the life of the battery.

Smart USB

It offers real-time power and UPS status monitoring with automatic or scheduled shutdown and many other advanced power management functions.

The Aunilec din rail UPS is a smart, compact and reliable power supply with industry leading design and wide range operation temperature. 

Features

The multi-plug UPS, featured with smart microprocessor control design, include a voltage stabilizer (AVR Automatic Voltage Regulator), a smart USB communication interface and a cold start function. It is an ideal solution for protecting household and small office systems. ln addition, the UPS offer USB charger to recharge mobile phones and tablets.

AVR - Boost and Buck

The AVR Boost and Buck automatically corrects either undervoltage or overvoltage condition without unnecessary battery drain and extends the life of the battery.

LCD Display

Easy read-out status from the screen. Indicates input voltage, output voltage, load level, battery level, ...

Designed for the IT market

The ARES series, are designed focusing on the IT market. They are very efficient UPS when it comes to power and protect computer loads and/or IT equipment (servers, PC network, professional NAS, even complex network devices, etc.)  The large front LCD display,  allows you to keep track of the operation of the machine and at the same time to have all the information about the power supply and the connected load, as well as providing accurate information on the status of the batteries and its available autonomy. Performances of these machines are remarkable: besides the standard connection with the PC and server through the USB port, there are also other hardware and software solutions available to interface all operating systems and to implement power redundancies. This models can also be used in working places different from the IT world: in fact they are able to power typically industrial loads as well without disturbances or interferences, protecting users remaining immune to disturbances.

LCD Display

The LCD display controlled by microprocessor allows the visualization of current and voltage parameters.

BC panic option

Getting voluntary sleep mode mood lighting (separate enclosure). Combined with a permanent central source, it switches the mood lighting (panic) permanent in non-permanent mode. Recovery in continuous operation can be done at any time manually or automatically on disappear sector.

Remote control panel option

The alarm report box includes 4 free entries relay contact associated with LEDs on the front.

Designed for the IT market

The ARES RT series, are designed focusing on the IT market. They are very efficient UPS when it comes to power and protect computer loads and/or IT equipment (servers, PC network, professional NAS, even complex network devices, etc.)  The large front LCD display,  allows you to keep track of the operation of the machine and at the same time to have all the information about the power supply and the connected load, as well as providing accurate information on the status of the batteries and its available autonomy. Performances of these machines are remarkable: besides the standard connection with the PC and server through the USB port, there are also other hardware and software solutions available to interface all operating systems and to implement power redundancies. This models can also be used in working places different from the IT world: in fact they are able to power typically industrial loads as well without disturbances or interferences, protecting users remaining immune to disturbances.

The revolutionary energy storage

The carbon battery is based on the lead acid technology. Unlike lithium batteries standard lead acid batteries have a big discharge capacity (up to C3*). Indeed, a much longer charging time (up to 10 hours, =0,1) must be accepted to prevent sulfatization which would shorten the lifetime of the battery. The new carbon technology provides a solution for this problem: Using carbon guarantees much less sulfatization of the negative electrode. Thus, the battery can be charged up to 3 times faster (=0,3C) than a standard lead acid battery.

Modern lithium battery sytems can also be charged within less than an hour, but the discharge capacity is very low: It must not exceed 50-70% of the battery capacity (= C0,5-07).

The fast charging is a significant progress in thecarbon technology, since the charging current for the daily cycle mode can be adjusted at 20-30% of the battery capacity (= 0,2-0,3C). Therefore, it is possible to recharge a discharged battery within 1-3 hours.

The revolutionary energy storage

Unlike lithium batteries standard lead acid batteries have a big discharge capacity (up to C3*). Indeed, a much longer charging time (up to 10 hours, =0,1) must be accepted to prevent sulfatization which would shorten the lifetime of the battery. The new lead carbon technology provides a solution for this problem: Using carbon additives guarantees much less sulfatization of the negative electrode. Thus, the battery can be charged faster than a standard lead acid battery.

Modern lithium battery sytems can also be charged within less than an hour, but the discharge capacity is very low: It must not exceed 50-70% of the battery capacity (= C0,5-07). The fast charging is a significant progress in lead carbon technology, since the charging current for the daily cycle mode can be adjusted at 20-30% of the battery capacity (= 0,2-0,3C).

Best price/performance ratio !

The IRIS+TT series is our best “price-performance ratio“ 3/3 phase UPS. Based on our modular UPS technology, we are able to offer extremely small UPS 10-30kVA solutions. A combination of our modular based UPS with a special DC/DC converter, the IRIS+TT UPS can work with a battery voltage of only 192 to 240Vdc (adjustable). It allows to reduce space and the batteries needed as well as the price.

Parallel redundancy mode

Up to IRIS+TT systems can be connected in parallel to get maximum power capacity. Only one battery is necessary with the parallel redundancy mode.

Specially designed for DIN rails

The AFRDin range is a family of stabilized and regulated single voltage DC power supplies, especially designed for mounting on DIN rail. According to the model the input network can be 115 VAC, single phase 230 VAC, 230 VAC or 400 VAC three phase. The power factor correction (PFC) according EN61000- 3-2 Class A is also integrated. Compact and powerful, this series has the UL, C-UL and CE marking. This series is ideally suited for all electrical applications like electronic enclosures and the automation industry in general.

Absolute reliability and performance

To ensure its compatibility with the most demanding applications, the Aunilec DPS system can withstand a high short-circuit current, in order to guarantee the selectivity of the downstream protections. The fully DIGITAL microprocessor logic controls the power conversion, supervises operation, supports the system and modifies the parameters in case of component failure to assure power supply to the load. 

If the load is highly distorted, the high frequency switching and the DPS loops support the system by keeping THD low. The Aunilec digital UPS units are fitted with a modern IGBT technology and a PWM modulation allowing to obtain a pure sinusoid output wave as required by the strictest standards contained in IEC EN 62040 class VFI-SS-III. 

Ventilation may be redundant, allowing to keep a rated output load only using one half of the fans. The air flow sensors detect the ventilation drop and immediately trigger an alarm, allowing to replace the damaged fan. 

The HELIOS_MPW is the ultimate modular UPS for DATA CENTRES and other CRITICAL LOADs. The HELIOS_MPW is designed to protect any critical high-density computer and IT environment, whilst achieving maximum availability. The HELIOS_MPW grows along with the demands of the business without over-sizing the UPS - optimizing both the initial investment and the Total Cost of Ownership. As soon as demand increases, the HELIOS_MPW modular solution can expand its power capability, maintaining the highest levels of power protection, availability, redundancy and investment savings.