Products

OP series - on-line double conversion

The OP series consists of UPS 5000 VA to 10000 VA. The technology, On-Line Double Conversion, is able to guarantee a constant supply of private and any electrical interference, both in the presence or absence of voltage with the help of the battery. The management software allows monitoring, programming and supervision of the proper operation of powered devices. UPS OP series are particularly suitable for powering computer system networks (industrial automation, telecommunications ...). The study of the battery also drew our attention because it is one of the most fundamental parts of the UPS. Indeed, we have developed an innovative charging system ABM (Advanced Battery Management) which increases the lifetime of the battery and optimizing recharge time (3-level charging technology).

Optimal protection with highest efficiency

Aunilec VEGA Series UPS is the top line in the power quality solutions for mission critical applications, including datacenters, industrial processes, building and medical emergency systems. From scalability to redundancy, from user-friendliness to maintainability, from parallel to connectivity, and from investment protection to lower cost of ownership, whichever value you need, VEGA provides industry leading efficiency.

In fact has been carefully designed to deliver maximum Return On Investment (ROI) and MTBF ,with the quickest Mean Time To Repair (MTTR). VEGA is an online double conversion UPS (VFI SS 111 – IEC EN 62040-3) with isolated inverter.

The VEGA Series range includes three-phase input and single-phase output versions from 10 to 100kVA with 6-Pulse thyristor rectifier (optional 12-Pulse for 60-80kVA) with and without optional input filter for harmonics-less distortion; from 10 to 200kVA three-phase input and output with 6-Pulse thyristor rectifier; from 100 to 600kVA three-phase input and output versions HP with IGBT Power Factor Correction rectifier.

Absolute reliability and performance

To ensure its compatibility with the most demanding applications, the Aunilec DPS system can withstand a high short-circuit current, in order to guarantee the selectivity of the downstream protections. The fully DIGITAL microprocessor logic controls the power conversion, supervises operation, supports the system and modifies the parameters in case of component failure to assure power supply to the load. 

If the load is highly distorted, the high frequency switching and the DPS loops support the system by keeping THD low. The Aunilec digital UPS units are fitted with a modern IGBT technology and a PWM modulation allowing to obtain a pure sinusoid output wave as required by the strictest standards contained in IEC EN 62040 class VFI-SS-III. 

Ventilation may be redundant, allowing to keep a rated output load only using one half of the fans. The air flow sensors detect the ventilation drop and immediately trigger an alarm, allowing to replace the damaged fan. 

One and three-phase range with IGBT

The AUNILEC INV series offers a range of one- and three-phase inverters with IGBT power conversion bridge. 

The system has been designed to continuously supply extra-low harmonics AC current to critical loads. The integrated static switch can automatically perform quick switching operations on the DC line, in case of black-out only, to substantially increase the global efficiency; it can also perform an ON-LINE conversion, in which the wave form is always generated by the inverter, thus ensuring a stable, undistorted waveform. 

In this case the load is switched to the emergency line only in case of inverter failure. The fast control system and the high-frequency PWM technology allow to connect the inverter to non-linear loads with a very low waveform distortion. The graphical display allows to show an easy to understand one-line diagram displaying the current status of the inverter and of the static switch, thus providing an accurate overview of the alarms and measurements. 

Power supply systems for industrial environments

RDC, the battery charging rectifier, is an energy converter for industrial use designed to ensure a constant power supply in association with the batteries. Using different types of connections and operating criteria, and building on the experience gained in the last 40 years, our partner can fulfil any request while ensuring a high system efficiency. The series of rectifiers and battery chargers for industrial use is based on total control 6- or 12-pulse thyristor bridges. We can supply a wide range of systems with voltage output from 24 V DC to 220 V DC and current output up to 1000 A. The equipment is installed inside stand-alone, self-supporting cabinets. The frame and the panels are made of steel. The protection degree is IP 30 (up to IP42 upon request) and IP 20 when the panels are open; access to the equipment is from the front. The equipment is designed, manufactured and tested in compliance with the applicable IEC regulations. 

HE - High Efficiency

VEGA HE series is available from 100 to 800 kVA. The UPS features a new on-line double-conversion technology utilising IGBT and DSP (Digital Signal Processor) control to provide maximum protection, power quality and green energy for any type of application including datacentres, disaster recover sites, telecoms rooms, industrial processes and security applications.

High efficiency stands for higher active power available if compared with legacy UPS thanks to output unitary power factor (up to +25% if compared unity with same UPS at p.f. 0,8). 

Nominal power is granted with no downgrading independently from operating temperature in the range 10÷40°C. Furthermore, control circuits and specifically designed firmware grant outstanding online double conversion efficiency up to 95,5%, comparable with the best transformeless UPS available on the market.

LCD Display

The LCD display controlled by microprocessor allows the visualization of current and voltage parameters.

BC panic option

Getting voluntary sleep mode mood lighting (separate box/cabinet). Combined with a permanent central source, it switches the mood lighting (anti-panic) permanent in non-permanent mode. Recovery in continuous operation can be done at any time manually or automatically on disappear sector.

Remote control panel option

The alarm report box includes 4 free entries relay contact associated with LEDs on the front.

LCD Display

The LCD display controlled by microprocessor allows the visualization of current and voltage parameters.

BC panic option

Getting voluntary sleep mode mood lighting (separate enclosure). Combined with a permanent central source, it switches the mood lighting (panic) permanent in non-permanent mode. Recovery in continuous operation can be done at any time manually or automatically on disappear sector.

Remote control panel option

The alarm report box includes 4 free entries relay contact associated with LEDs on the front.

LCD Display

The LCD display controlled by microprocessor allows the visualization of current and voltage parameters.

BC panic option

Getting voluntary sleep mode mood lighting (separate box/cabinet). Combined with a permanent central source, it switches the mood lighting (anti-panic) permanent in non-permanent mode. Recovery in continuous operation can be done at any time manually or automatically on disappear sector.

Remote control panel option

The alarm report box includes 4 free entries relay contact associated with LEDs on the front.

LCD Display

The LCD display controlled by microprocessor allows the visualization of current and voltage parameters.

BC panic option

Getting voluntary sleep mode mood lighting (separate box/cabinet). Combined with a permanent central source, it switches the mood lighting (anti-panic) permanent in non-permanent mode. Recovery in continuous operation can be done at any time manually or automatically on disappear sector.

Remote control panel option

The alarm report box includes 4 free entries relay contact associated with LEDs on the front.

Efficiency

The power sources Aunilec ensure the highest protection and maximum quality of energy for all charges, including for industrial, security systems, electro-medical systems, industrial processes and telecommunications.

The range AESA-TM / TT has an on-line double conversion technology (VFI) making it impossible to interrupt the power supply to the transformer output of the inverter as stipulated by the VFI-SS-111 classification and accordance with IEC EN 62040-3.

AESA-TM / TT range consists of a three phase input and single phase output from 10 to 60 kVA and three phase input and output 10-80 with IGBT rectifier and input power correction factor.

Specially designed for DIN rails

The AFRDin range is a family of stabilized and regulated single voltage DC power supplies, especially designed for mounting on DIN rail. According to the model the input network can be 115 VAC, single phase 230 VAC, 230 VAC or 400 VAC three phase. The power factor correction (PFC) according EN61000- 3-2 Class A is also integrated. Compact and powerful, this series has the UL, C-UL and CE marking. This series is ideally suited for all electrical applications like electronic enclosures and the automation industry in general.

New generation of battery chargers

Our new generation of battery chargers CRFD was designed to bring you more innovation while maintaining the performance of the previous range.

11 positions depending on battery technology (Sealed lead, lead acid, AGM, Gel, etc.)

Additional information deported for batteries and charging status

Additional terminals for connecting an external load balancer for adding with extra batteries

High performance level

Function "balancing current" (mounting in parallel) up to 6 chargers

Extended powers range of chargers

Compact

The cabinet can be installed either vertically or horizontally depending on the space available.

Optional modules

Optional modules outputs are available to show the signals displayed on the front of the cabinet of the energy system.

Removable door

The door has a quick closure with speed of use and quick connection of the earth.  An opening prevention contact series is available.

DC power set

These new devices are the result of a research and development by our company, to have maximum reliability and performance in the field of energy supply systems. We have not chosen to implement only the traditional energy conversion systems (isolating transformer with a thyristor), but to liaise flexibility and the advance of a digital logic to a microcontroller.

The electronic controls of the RCRFn rectifiers are reliable and increase the life of batteries.