Home

Subcategories

There are 101 products.

Showing 31-45 of 101 item(s)

Active filters

  • UPS IRIS+ 6/10kVA (1/1)

    Parallel redundancy mode

    Up to 4 IRIS+ systems can be connected in parallel to get maximum power capacity. Only one battery is necessary in the parallel redundancy mode.

    Estimated remaining time (LCD)

    The LCD display shows an estimation of the remaining battery backup time.

  • Industrial UPS Série OP...

    OP series - on-line double conversion

    The OP series consists of UPS 5000 VA to 10000 VA. The technology, On-Line Double Conversion, is able to guarantee a constant supply of private and any electrical interference, both in the presence or absence of voltage with the help of the battery. The management software allows monitoring, programming and supervision of the proper operation of powered devices. UPS OP series are particularly suitable for powering computer system networks (industrial automation, telecommunications ...). The study of the battery also drew our attention because it is one of the most fundamental parts of the UPS. Indeed, we have developed an innovative charging system ABM (Advanced Battery Management) which increases the lifetime of the battery and optimizing recharge time (3-level charging technology).

  • BC-PANIQUE for power sources

    Cabinet for power sources

    The panic lighting can be switched on or off while the presence of the public. If the light sources are off on standby, their automatic ignition must be provided from a sufficient number of power failure detection points. The establishment of a cabinet "BC-PANIC" allows the laying up of the anti-panic lighting (for power sources only).

    Associated with a permanent central source, it allows switching, ambient lighting in PERMANENT to NO PERMANENT mode. Recovery in PERMANENT mode can be done at any time manually or automatically on disappearance sector.

  • Hybrid UPS AUNISOL 3/5/10 kW

    Hybrid inverter

    During the day, the primary function of the PV installation is to supply the load with Energy. Every excess will be stored in the batteries or/and re-injected into the Grid. These functions are configurable.

    Energy storage

    During weak PV production or at night, the energy stored in the batteries supplies the load or can be re-injected into the Grid. The different discharge parameters are configurable

    Blackout protection / Offgrid

    The integrated Line-interactive UPS guarentee 100% energy supply in case of a power failure. The output power is 3kW for AUNISOL3+G (single phase), 5kW for AUNISOL5+G (single phase) and 10kW for AUNISOL10T+G (three-phase). The AUNISOL series can also work as an Off Grid installation.

  • Controllers VIDI AUPUS C

    Intelligent user interface

    VIDI Controller Platform is for AUPUS DC Power Systems. It provides intelligent and easy user interface and comprehensive set of features for DC Power System management.

    VIDI architecture is based on PowerCAN bus communication and a modular design, which enables excellent system expandability, selectable additional features and flexibility in the design.

  • UPS Solar Hybrid Aunisol...

    Working principle

    During normal day operation, the connected load is powered by solar energy. If the solar energy is not strong enough, all missing energy is supplied by the batteries. If both energies are not available, the system automatically switches to normal AC supply or genset.

    What makes the difference ?

    Our VRLA Gel deep cycle batteries are conform to the cycles use test norm IEC61427. The batteries still provide 100% of the full capacity in Ampere-hour (Ah) after 148 cycles.

  • CRFw 12Vcc, 24Vcc and 48Vcc

    Compact

    The cabinet can be installed either vertically or horizontally depending on the space available.

    Optional modules

    Optional modules outputs are available to show the signals displayed on the front of the cabinet of the energy system.

    Removable door

    The door has a quick closure with speed of use and quick connection of the earth.  An opening prevention contact series is available.

  • DC Power systems in 19" 7U...

    N+1 backup power solutions

    AUPUS HE power systems are robust, free convection cooled, N+1 redundant backup power solutions for critical infrastructure applications such as transmission and distribution substations, process industries, railway signalling and substations and telecommunications.  

    AUPUS HE DC power systems consist of MHE rectifiers, VIDI+ controllers, Connections for mains and battery and load distribution. System is configurable to match with requirements of the application. 

  • Voltage stabilizers REG

    Power supply and professional users

    The voltage fluctuations are particularly treacherous interferences since they are not seen and can only be detected by using specific instrumentation. When such interferences are present, the electrical equipment seems to maintain correct operation but disguises serious problems that at times are beyond repair. 

    Aunilec proposal

    The REG stabilisers are registered names of two series of electrodynamic voltage stabilisers that offer a reliable and tested economic solution to inconveniences caused by voltage fluctuations. Their use is a real investment because the elimination of the inconveniences means a reduction in costs and an increase in productivity. Very often it is only necessary to avoid a few minutes machine downtime or just one failure to pay the cost of the stabilizers for itself.

  • DC Power systems in 19" 12U...

    Redundant backup power solutions

    AUPUS C power systems are robust, free convection cooled, N+1 redundant backup power solutions for critical infrastructure applications such as transmission and distribution substations, process industries, railway signalling and substations and telecommunications.  

    AUPUS C DC power systems consist of MHE rectifiers, VIDI+ controllers, Connections for mains and battery and load distribution MCB. System is configurable to match with requirements of the application. 

  • B25 series automatic...

    Power factor correction in presence of harmonics

    In recent years, Power Factor Correction has evolved greatly due to the presence of generated harmonics by the loads. 

    These loads produce harmonic currents and voltage which distorts the network waveforms. The main sources of harmonics are generated by AC/DC static converters and UPS systems. For these reasons it is essential that any installation of Power Factor Correction equipment must be carefully evaluated. 

    The possible presence of harmonic currents in the network could create conditions of parallel resonance between the inductance of the network and the capacitors, generating overcurrents and overvoltages, which would cause premature failure of the power factor correction capacitors. The ideal power factor correction solution for any system must be determined by examination of the system parameters and harmonic spectrum.  

  • DC Power systems rectifiers...

    Designed for industrial and telecom applications

    The MHE rectifier utilizes Aunilec’s long experience and latest technology on high performance industrial power supplies. MHE rectifiers are designed to meet demanding requirements of utility, industrial, rail and telecom applications with high efficiency and reliability requirements. 

    MHE rectifiers are convection cooled and requires no fans. Rated output power is 2000 W in 48 V – 220 V output versions and 1500 W in 24 V version. Rectifier input is single phase, range 85-300 VAC.

  • FAFW34030 series Modular...

    Harmonic current generator

    The Aunilec APF behaves like an harmonics current generator. It will measure the harmonic generated from the non-linear loads and cancel these harmonics with an opposite phase at the same amplitude.

    Power factor correction

    The Aunilec APF not only compensate harmonic current but also the reactive power. It is able to correct for either a leading or lagging power factor.

    LCD display

    The user friendly LCD display offers access to all parameters, waveforms, harmonic spectrum system power quality, settings, status and alarms, events log and language selection.

  • Gel deep cycle battery...

    What makes the difference ?

    Our VRLA Gel deep cycle batteries are conform to the cycles use test norm IEC61427. The batteries still provide 100% of the full capacity in Ampere-hour (Ah) after 148 cycles.

    Our Gel deep cycle batteries use high-tin alloy grid which increase corrosion resistance of plates and lengthen the service life. High-tight assembly technics, they accept very high charge and high current discharge performance. 

    In combination  with our Hybrid Solar UPS solutions, the battery offers the best possible performance. For standart UPS application , the battery has a design lifetime of 10-12 years. 

  • Carbon Battery 12ET70PC,...

    The revolutionary energy storage

    Unlike lithium batteries standard lead acid batteries have a big discharge capacity (up to C3*). Indeed, a much longer charging time (up to 10 hours, =0,1) must be accepted to prevent sulfatization which would shorten the lifetime of the battery. The new lead carbon technology provides a solution for this problem: Using carbon additives guarantees much less sulfatization of the negative electrode. Thus, the battery can be charged faster than a standard lead acid battery.

    Modern lithium battery sytems can also be charged within less than an hour, but the discharge capacity is very low: It must not exceed 50-70% of the battery capacity (= C0,5-07). The fast charging is a significant progress in lead carbon technology, since the charging current for the daily cycle mode can be adjusted at 20-40% of the battery capacity (= 0,2-0,4C). Therefore, it is possible to recharge a discharged battery within several hours.